If you own the motorcycle, you have probably taken care of a motorcycle battery charger that are going to not work because the actual battery voltage was far too low. Most motorcycle battery chargers and / or motorcycle battery trickle chargers have this challenge. Pulling the battery voltage down too low is straightforward to do. Just leave a load activated your bike and come back in a few days and you have the lowest voltage battery.
If you now have the severely discharged 12v electric battery (below 9v), you start to experience some complications with a motorcycle battery trickle charger. Most motorcycle battery chargers are able to only charge a 12v battery in just a certain range, such as 7-13 volts for one 12v battery. If any voltage falls below 7 volts, the particular motorcycle battery charger cannot really recognize the battery along with cannot begin charging. On this situation, you would require to jump start the battery to elevate the battery voltage to permit the motorcycle battery trickle charger to begin with charging. This can become extremely frustrating. With you are interested in a new motorcycle battery power charger; make sure a person does some research on the best way low the battery charger may charge a 12v battery. A number of the high-end motorcycle battery chargers may charge down 2 volts. It isn't uncommon to pull a 12v battery up to 2-3 volts. Just stick a 12v DC mild onto a battery to see how long the light will continue to be illuminated. I highly recommend the better end motorcycle battery trickle chargers that is why. Some of the more expensive motorcycle battery chargers also provide a supply mode. That is an awesome and useful charge mode because of the battery charger does not likely care what the voltage of this battery is. This is one of those features that you do not realize how important it is until you now have a severely discharged battery.
Sat Sep 17, 2011 7:03 pm
